Whirlpool wgd6600 Guia Do Utilizador

Use Steam Cycles to help smooth out wrinkles from dry items, such 
as clothes that have been worn or clothes that have been left in the 
dryer too long. When a Steam Cycle is selected, the estimated time 
remaining display shows the actual time remaining in the cycle.

NOTE: Results may vary depending on fabric. 100% cotton 
garments with wrinkle-free finish may yield better results than 
those without.

Use of a fabric softener sheet is not recommended with steam 
cycles as it may cause temporary staining on the clothes.

This cycle is best for smoothing out wrinkles and reducing odors 
from loads consisting of one to four dry items of wrinkle-free cotton, 
cotton-polyester blend, common knits, and synthetic garments. In 
this cycle a small amount of water is sprayed into the dryer drum 
after several minutes of tumbling with heat. The dryer will continue to 
tumble with heat followed by a brief cool down. The heat level and 
cycle time are not adjustable.

This cycle is best for touching up clothes that have been left in the 
dryer too long. In this cycle, a small amount of water is sprayed into 
the dryer drum after several minutes of tumbling with heat. The dryer 
will continue to tumble with heat followed by a brief cool down. The 
dry time and temperature can be adjusted for this cycle.

NOTE: Overloading the dryer may not yield the same results. 

 

 

Helps to smooth out 
wrinkles and reduce odors 
from loads consisting of one 
to four dry items.

Medium 

15

ENHANCED TOUCH UP 

 

Helps to smooth out 
wrinkles in loads left in the 
dryer for an extended 
period.

Medium 

20

*Temperature and Time Adjust are selectable only for the 

Enhanced Touch Up Cycle. 

NOTE: The Enhanced Touch Up cycle has a minimum dry time 
of 15 minutes and a maximum dry time of 40 minutes. Only the 
Medium and High temperature settings can be used for the 
Enhanced Touch Up cycle.

Use Timed Cycles to select a specific amount of drying time and a 
drying temperature. When a Timed Cycle is selected, the Estimated 
Time Remaining display shows the actual time remaining in your 
cycle. You can change the actual time in the cycle by pressing the 
Time Adjust up or down arrows. See “Changing Cycles, Modifiers, 
and Options.”

NOTE: Timed Cycles may also be used with the drying rack. See 
“Drying Rack.”

Use this cycle to complete drying if items are still damp after an 
Automatic Cycle. Timed Dry is also useful for drying heavyweight 
and bulky items, such as bedspreads and work clothes. Lightweight 
garments, such as exercise wear, can be dried using Timed Dry on a 
low temperature setting. 

 

TIMED DRY 

 

Heavyweight, bulky items, 
work clothes

High

40

Use the Dryness Modifier to select dryness levels for the Auto Dry 
Cycles. Press DRYNESS until the desired Dryness setting 
illuminates.

The preset dryness setting is Normal when an Automatic Cycle is 
selected. You can select a different dryness level, depending on your 
load, by pressing Dryness and choosing More, Normal, Less, or 
Damp. Selecting More, Normal, Less, or Damp automatically adjusts 
the dryness level at which the dryer will shut off. Once a dryness 
level is set, it cannot be changed without stopping the cycle.

NOTE: Dryness Level selections cannot be used with the Timed 
Cycles.  

Use the Temperature Modifier to select temperatures for the Timed 
Cycles. Press TEMP until the desired temperature setting 
illuminates. 

NOTE: Temperature modifiers cannot be used with the Auto Dry 
Cycles.