Whirlpool wgd6600 Guia Do Utilizador

Recommended hood styles are shown here.

     4"
(102 mm)

      4"
(102 mm)

The angled hood style (shown here) is acceptable.

   4"

■

An exhaust hood should cap the vent to keep rodents and 
insects from entering the home.

■

Exhaust hood must be at least 12" (305 mm) from the ground or 
any object that may be in the path of the exhaust (such as 
flowers, rocks, or bushes, snow line, etc.).

■

Do not use an exhaust hood with a magnetic latch.

Moisture damage to woodwork, furniture, paint, wallpaper, 
carpets, etc.

Housecleaning problems and health problems.

Typical installations vent the dryer from the rear of the dryer.  

Venting systems come in many varieties. Select the type best for 
your installation. Two close-clearance installations are shown. Refer 
to the manufacturer’s instructions. 

NOTE: The following kits for close clearance alternate installations 
are available for purchase. Please see the “Assistance or Service” 
section to order.

■

Over-the-Top Installation: 

Part Number 4396028

■

Periscope Installation (For use with dryer vent to wall vent 
mismatch):

Part Number 4396037 - 0" (0 mm) to 18" (457 mm) mismatch

Part Number 4396011 - 18" (457 mm) to 29" (737 mm) 
mismatch

Part Number 4396014 - 29" (737 mm) to 50" (127 mm) 
mismatch

■

Rear exhaust installation to left or right side:

Part Number 49611

■

Rear Exhaust installation to left side

Part Numbers 8544761 and 8212504

The exhaust vent must be securely fastened to a noncombustible 
portion of the mobile home structure and must not terminate 
beneath the mobile home. Terminate the exhaust vent outside.