Trendnet teg-s224s  Guia De Especificação

The TEG-S224S is a high-capacity management stackable Fast 
Ethernet slave switch that provides the scalability and flexibility 
to deploy a cost-effective network environment. The TEG-
S224S has two module slots. Slot 1 is a 2-port 10/100Base-TX 
module (switched), which it can be replaced with either a 2-port 
100Base-FX (MT-RJ) module (optional) or a 1-port 100Base-FX 
(SC) module (optional). Slot 2 is dedicated for one SIO port 
stacking module. The TEG-S224S can be controlled and 
managed when stacking with the TEG-S224M master switch. 
Using the optional switch modules, they support a maximum 
configuration of 94 10/100Mbps Ethernet ports and two Gigabit 
Ethernet ports (1 x TEG-S224M + 3 x TEG-S224S).

TEG-S224S

Complies with IEEE 802.3, IEEE 802.3µ, IEEE 802.1p/Q, IEEE 802.3x standards

24 N-way auto-negotiation UTP/STP ports

Half- and full-duplex modes

Store-and-forward switching method

Data filtering eliminates bad packets and runts

12K MAC address table per device

Back-plane bandwidth up to 10.66Gbps

Front panel port status LEDs

EIA-19 rack mountable

5 Year Warranty

Supports IEEE 802.1d Spanning Tree Protocol

 Port-based VLAN

IEEE 802.1q VLAN tagging and extended Port/MAC based VLAN

Integrated flow control

Port aggregation support

IGMP snooping - Multimedia Applications support

Broadcast Storm Filtering monitors the broadcast traffic

Web-based network management to monitor and configure the device

The full-duplex Gigabit switch brings 
high bandwidth with 2000Mbps speed.

Provides up to 94-port 10/100Base-TX 
ports and two Gigabit ports.

Supports IEEE 802.1p Traffic 
Prioritization for time-sensitive and 
mission-critical traffic.

With different optional modules, the 
switch can be easily connected to 
other networks.

 

Provides the benefit of extensive and 
simple management through SNMP, 
HTTP, and four RMON groups.

What's Next in Networking