3com 8807 Guia De Referência

C

HAPTER

 64: P

ORT

 L

OOPBACK

 D

ETECTION

 C

OMMANDS

undo loopback-detection enable vlan { vlanlist | all }

System view

None

Use the loopback-detection enable vlan command to enable the loopback 
detection function on a VLAN to perform the loopback detection on all ports in 
the VLAN.

Use the undo loopback-detection enable vlan command to disable the 
loopback detection on a VLAN.You can perform such configuration on up to 800 
VLANs.

By default, the loopback detection is not performed on any VLAN.

# Configure the system to perform loopback detection on all ports belonging to 
VLAN 2.

<SW8800> system-view

 

[SW8800] loopback-detection enable vlan 2. 

loopback-detection interval-time time

System view

time: Interval at which the external loopback detection is performed on ports, in 
the range of 60 to 7200, in seconds.The default value is 60 seconds.

Use the loopback-detection interval-time command to set the interval at which 
the external loopback detection is performed on ports.

Use the undo loopback-detection interval-time command to restore this 
interval time to the default.

Related command: display loopback-detection.

# Set the interval for the external loopback detection on each port to 120 seconds.

<SW8800> system-view

 

[SW8800] loopback-detection interval-time 120#