3com 8807 Guia De Referência
1092
C
HAPTER
67: P
ASSWORD
C
ONTROL
C
ONFIGURATION
C
OMMANDS
Parameter
aging-time: Configures the system password aging time. Value range 1 to 365
days, and the default value is 90 days.
days, and the default value is 90 days.
Length: Configures the minimum password length. The value range is 4 to 32
characters, and the default value is 10.
characters, and the default value is 10.
login-times: Configures the maximum number of login attempts for each user. The
value range is 2 to 10, and the default value is 3.
value range is 2 to 10, and the default value is 3.
max-record-num: Configures the maximum number of history password records
for each user. The value range is 2 to 10; default: 4.
for each user. The value range is 2 to 10; default: 4.
alert-time: Configures the alert time before password expiration. The value range
is 1 to 30 days, and the default value is 7 days.
is 1 to 30 days, and the default value is 7 days.
authentication-timeout: Configures the timeout time for user authentication; The
value range is 30 to 120 seconds, and the default value is 60 seconds.
value range is 30 to 120 seconds, and the default value is 60 seconds.
Exceed: Configures the processing mode after failed login attempts.
Lock: Locks the login user so that the user will not be able to log in to the switch
until the administrator removes the user from the blacklist manually.
until the administrator removes the user from the blacklist manually.
locktime [ time ]: Specifies the time during which the user is locked. The value
range is 3 to 360 seconds, and the default value is 120 seconds. A locked user can
log in to the switch again after the configured lock time.
range is 3 to 360 seconds, and the default value is 120 seconds. A locked user can
log in to the switch again after the configured lock time.
Unlock: The user can still log in after failed login attempts, without being locked.
The default processing mode is the locktime mode after password authentication
fails. Namely, the system will lock the user, and allow the user to log in to the
switch after the configured period of time.
fails. Namely, the system will lock the user, and allow the user to log in to the
switch after the configured period of time.
Description
Use the password-control aging aging-time command to configure the aging
time for system login passwords. This command can also be carried out in the local
user view.
time for system login passwords. This command can also be carried out in the local
user view.
Use the password-control length length command to configure the minimum
length for the system login passwords. This command can also be carried out in
the local user view.
length for the system login passwords. This command can also be carried out in
the local user view.
Use the password-control login-attempt login-times command to configure the
number of password attempts allowed for each user.
number of password attempts allowed for each user.
Use the password-control history max-record-num command to configure the
maximum number of history password records allowed for each user.
maximum number of history password records allowed for each user.
Use the password-control alert-before-expire alert-time command to
configure the alert time before password expiration.
configure the alert time before password expiration.
Use the password-control authentication-timeout authentication-timeout
command to configure the timeout time for user password authentication.
command to configure the timeout time for user password authentication.