3com 8807 Guia De Referência
AAA Configuration Commands
313
dot1x: Specifies 802.1x access mode.
gcm: Specifies GCM access mode.
domain domain-name: Configures to display all the users in an ISP domain.
domain-name specifies the ISP domain name with a character string not exceeding
24 characters. The specified ISP domain shall have been created.
domain-name specifies the ISP domain name with a character string not exceeding
24 characters. The specified ISP domain shall have been created.
hwtacacs-scheme hwtacacs-scheme-name: Displays all the user connections of
the hwtacacs scheme named hwtacacs -scheme-name. hwtacacs -scheme-name
is a string of no more than 32 characters.
the hwtacacs scheme named hwtacacs -scheme-name. hwtacacs -scheme-name
is a string of no more than 32 characters.
mac mac-address: Configures to display the supplicant whose MAC address is
mac-address. The argument mac-address is in the hexadecimal format (x-x-x).
mac-address. The argument mac-address is in the hexadecimal format (x-x-x).
radius-scheme radius-server-name: Configures to display the supplicant
according to RADIUS server name. radius-server-name specifies the RADIUS server
name with a character string not exceeding 32 characters.
according to RADIUS server name. radius-server-name specifies the RADIUS server
name with a character string not exceeding 32 characters.
interface interface-type interface-number: Configures to display the supplicant
according the port.
according the port.
ip ip-address: Configures to display the user specified with IP address.
vlan vlanid: Configures to display the user specified with VLAN ID. Here, vlanid
ranges from 1 to 4094.
ranges from 1 to 4094.
ucibindex ucib-index: Configures to display the user specified with ucib-index.
Here, ucib-index ranges from 0 to 2311.
Here, ucib-index ranges from 0 to 2311.
user-name user-name: Configures to display a user specifies with user-name.
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". The @
character can only be used once in one username. The pure username (the part
before @, namely the user ID) cannot exceed 24 characters.
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". The @
character can only be used once in one username. The pure username (the part
before @, namely the user ID) cannot exceed 24 characters.
Description
Use the display connection command to view the relevant information of all the
supplicants or the specified one(s). The output can help you with the user
connection diagnosis and troubleshooting.
supplicants or the specified one(s). The output can help you with the user
connection diagnosis and troubleshooting.
If no parameter is specified, this command displays the related information about
all connected users.
all connected users.
Related command: cut connection.
Example
# Display the relevant information of all the users.
<SW8800>display connection
Total 0 connections matched ,0 listed.
display domain
Syntax
display domain [ isp-name ]