3com 8807 Guia De Referência

C

HAPTER

 37: MSDP C

ONFIGURATION

 C

OMMANDS

MSDP view

interface-type: Interface type.

interface-number: Interface number.

Use the originating-rp command to allow a MSDP to use the IP address of 
specified interface as the RP address when the SA message originated.

Use the undo originating-rp command to remove the configuration.

By default, the RP address in the SA message is the RP address configured by PIM.

Configure logical RP by using this command.

# Configure IP address of the interface Vlan-interface10 as the RP address in the 
SA message originated.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] msdp

 

[3Com-msdp] originating-rp Vlan-interface 10 

peer peer-address connect-interface interface-type interface-number

undo peer peer-address

MSDP view

peer-address: Address of MSDP peer.

connect-interface interface-type interface-number: Interface type and number 
whose primary address is used by the local router as the source IP address to 
establish TCP connection with remote MSDP peers.

Use the peer command to configure an MSDP peer.

Use the undo peer command to remove the MSDP peer configured.

If the local router is also in BGP peer relation with a MSDP peer, the MSDP peer 
and the BGP peer should use the same IP address.

Related command: static-rpf-peer.