3com 8807 Guia De Referência

Display Commands of the Routing Table

389

View

Any view

Parameter

inactive: With the parameter, this command displays the inactive route
information. Without the parameter, this command displays the active and
inactive route information.

verbose: With the verbose keyword, this command displays the verbose route
information. Without the parameter, this command displays the route summary.

protocol: The parameter has multiple selectable values:

■

direct: Displays direct connection route information

■

static: Displays the static route information.

■

bgp: Displays BGP route information.

■

isis: Displays IS-IS route information.

■

ospf: Displays OSPF route information.

■

ospf-ase: Displays OSPF ASE route information.

■

ospf-nssa: Displays OSPF NSSA route information.

■

rip: Displays RIP route information.

vpn-instance-name: Indicates a VPN instance name.

Description

Use the display ip routing-table protocol command to view the route
information of specified protocol.

Example

# Display all direct connection routes summary.

<SW8800> display ip routing-table protocol direct

DIRECT Routing tables:

Summary count: 4

DIRECT Routing tables status:<active>:

Summary count: 3

Destination/Mask Protocol Pre Cost Nexthop Interface

20.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0

127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0

127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0

DIRECT Routing tables status:<inactive>:

Summary count: 1

Destination/Mask Protocol Pre Cost Nexthop Interface

210.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0

# View the static routing table.

<SW8800> display ip routing-table protocol static

STATIC Routing tables:

Summary count: 1

STATIC Routing tables status:<active>:

Summary count: 0

STATIC Routing tables status:<inactive>:

Summary count: 1

Destination/Mask Protocol Pre Cost Nexthop Interface

1.2.3.0/24 STATIC 60 0 1.2.4.5 Vlan-interface10