3com 8807 Guia De Referência

C

HAPTER

 25: OSPF C

ONFIGURATION

 C

OMMANDS

display ospf [ process-id ] brief

Any view

process-id: Process ID of OSPF. The command is applied to all current OSPF 
processes if you do not specify a process ID.

Use the display ospf brief command to view the main summary of OSPF.

# Display the OSPF summary.

<SW8800> display ospf brief

 

OSPF Process 1 with Router ID 10.110.95.189

 

OSPF Protocol Information

 

RouterID: 10.110.95.189  Border Router: Area AS

 

spf-schedule-interval: 5

 

Routing preference: Inter/Intra: 10 External: 150

 

Default ASE parameters: Metric: 1 Tag: 0.0.0.1 Type: 2

 

SPF computation count: 16

 

Area Count: 1    Nssa Area Count: 0

 

 
 Area 0.0.0.0:

 

   Authtype: none   Flags: <>

 

   SPF scheduled: <>

 

   Interface: 201.1.1.4 (Vlan-interface1)

 

     Cost: 1 State: DR    Type: Broadcast

 

     Priority: 1

 

     Designated Router: 201.1.1.4

 

     Backup Designated Router: 201.1.1.3

 

     Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1 

mask  Mask 

tag 

Tag 

status 

Status information, including two values: 

DoNotAdvertise 

The summary routing information to the 
network segment will not be advertised 

Advertise 

The summary routing information to the 
network segment will be advertised

Table 55   Description of the fields of the display ospf asbr-summary command

Table 56   Description of the fields of the display ospf brief command

RouterID 

Router ID of the router 

Border Router 

Border routers for connection to the area, including autonomous 
system border router (ASBR) and area border router (ABR) 

spf-schedule-interval 

Interval of SPF schedule in seconds 

Authtype 

Authentication type of OSPF