3com 8807 Guia De Referência

C

HAPTER

 27: BGP C

ONFIGURATION

 C

OMMANDS

Use the peer filter-policy import command to configure the filter-policy list of 
the routes received by a peer/peer group.

Use the undo peer filter-policy import command to cancel the existing 
configuration.

By default, a peer/peer group has no access control list (acl).

Related command: ip as-path-acl, peer as-path-acl export, peer as-path-acl 
import.

The priority of the inbound filter policy configured for the peer is higher than that 
configured for the peer group.

# Configure to use acl 2000 to filter the routes received by the peer group test..

[3Com-bgp] peer test filter-policy 2000 import 

peer { peer-address | group-name } graceful-restart

undo peer { peer-address | group-name } graceful-restart

BGP view

group-name: Name of the peer group, which can consist of 1 to 47 alphabetic 
letters and numerals.

peer-address: IP address of the peer.

Use the peer graceful-restart command to enable the Graceful-restart ability of 
the specified peer or peer group.

Use the undo peer graceful-restart command to disable the Graceful-restart 
ability of the specified peer or peer group.

If the Graceful-restart ability is enabled for a peer group first, peers added into this 
group afterwards also inherits the Graceful-restart ability of this group.

It is allowed that peers in a peer group have a different Graceful-restart ability than 
that configured for this peer group. For example, after configuring Graceful-restart 
for the whole peer group, you can disable the Graceful-restart ability of a specific 
peer. To do so, you must configure Graceful-restart for the peer group first, and 
then use the undo graceful-restart command on the peer.

# Enable Graceful-restart on a peer whose IP address is 10.2.2.2.