3com 8807 Guia Do Utilizador

By default, the integer mode is used. That is, the switch supports the RADIUS 
server delivering VLAN IDs in integer form.

Perform the following configuration in VLAN view.

By default, the delivered VLAN does not have a name.

For the 3Com Series Switches, the RADIUS protocol is configured on the per 
RADIUS scheme basis. In real networking environment, a RADIUS scheme can be 
an independent RADIUS server or a set of primary/secondary RADIUS servers with 
the same configuration but two different IP addresses. Accordingly, attributes of 
every RADIUS scheme include IP addresses of primary and secondary servers, 
shared key and RADIUS server type etc.

Actually, RADIUS protocol configuration only defines some necessary parameters 
using for information interaction between NAS and RADIUS Server. To make these 
parameters take effect on an ISP domain, you must configure the ISP domain to 
use the RADIUS scheme configured with these parameters in ISP domain view. For 
more about the configuration commands, refer to the AAA Configuration section 
above.

The following sections describe RADIUS protocol configuration tasks.

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

Table 206   Configure the name of a delivered VLAN

Configure the name of a delivered VLAN 

name string 

Remove the configured VLAN name and restore it to the default name 

undo name