3com 8807 Guia Do Utilizador

network robustness and enhances the operation and management capability of 
multicast network.

1 PIM-SM basic configuration includes:

■

Enabling Multicast

■

Enabling PIM-SM

■

Entering the PIM view

■

Configuring candidate-BSRs

■

Configuring candidate-RPs

■

Configuring static RP

2 PIM-SM advanced configuration includes:

■

Configuring the PIM-SM domain boundary

■

Configuring the sending interval for the Hello packets of the interface

■

Configuring the filtering of multicast source/group

■

Configuring the filtering of PIM neighbor

■

Configuring the maximum number of PIM neighbor on an interface

■

Configuring RP to filter the register messages

■

Limiting the range of legal BSR

■

Limiting the range of legal C-RP

■

Clearing multicast route entries from PIM routing table

■

Clearing PIM neighbor

c 

Refer to “Enabling Multicast Routing” “Enabling Multicast Routing”.

This configuration can be effective only after multicast is enabled.

Perform the following configuration in interface view.

Repeat this configuration to enable PIM-SM on other interfaces. Only one 
multicast routing protocol can be enabled on an interface at a time.

Once enabled PIM-SM on an interface, PIM-DM cannot be enabled on the same 
interface and vice versa.

Table 456   Enable PIM-SM

Enable PIM-SM on an interface 

pim sm 

Disable PIM-SM on an interface