3com 8807 Guia Do Utilizador

C

HAPTER

 67: SSH T

ERMINAL

 S

ERVICE

Perform the following configuration in system view.

The default service type is NULL and the default directory for SFTP users is NULL. If 
a user is configured with a service type and directory, the service type and directory 
of the user, rather than the default service type, are used. Therefore, if a single 
user is configured, the user must be configured with complete authentication type 
and service type; otherwise, the user may not be able to log in because of being 
configured incompletely.

Note the following points:

■

The default SFTP directory flash: is configured for a user whose service type is 
set to SFTP or all. In this case, the priority of the directory is higher than the 
default priority.

■

Currently, for remote authentication, the default authentication mode must be 
configured in the system before a remote user can log in successfully.

Use this configuration to set the type of SSH service to be used.

Perform the following configuration in system view.

By default, the service type is stelnet.

Perform the following configuration in system view.

By default, the SFTP server is shut down.

Table 731   Configure the default service type and the default directory for SFTP users

Configure the default service type and the 
default directory for SFTP users 

ssh service-type default { all [ 
sftp-directory directory ] | sftp [ 
sftp-directory directory ] | stelnet } 

Restore the default service type and the 
default directory for SFTP users 

Table 732   Configure the service type to be used

Configure the service type to be used 

ssh user username service-type { stelnet | 
sftp [ sftp-directory directory ] | all [ 
sftp-directory directory ] } 

Restore the default service type 

undo ssh user username service-type

Table 733   Start the SFTP server

Start the SFTP server 

sftp server enable 

Shut down the SFTP server