3com S7906E Instrução De Instalação
6
Configuring QoS in an EPON System
QoS Configuration Task List in an EPON System
QoS configurations in an EPON system are the same as those in Ethernet, and the corresponding
configuration commands in OLT port view and ONU port view are the same as those in Ethernet port
view too. For detailed configuration, refer to the corresponding chapters above.
and
show how to configure QoS for downlink traffic and uplink traffic in an EPON
system.
Table 12-1 Configure QOS at the OLT side of an EPON system
QoS at the OLT side
Reference
Configure priority mapping on
the OLT
the OLT
Configuring priority trust mode
for the OLT port
for the OLT port
Configure traffic policing for
uplink traffic of all ONUs
(through QoS)
uplink traffic of all ONUs
(through QoS)
Configure QoS for uplink
traffic
traffic
Configure congestion
management on the uplink port
management on the uplink port
Configure the OLT to perform
priority mapping for traffic
received on an uplink port
priority mapping for traffic
received on an uplink port
Configure congestion
management (SP and WRR) on
the downlink OLT port
management (SP and WRR) on
the downlink OLT port
Configure the high-priority
queue buffer for the specified
ONU
queue buffer for the specified
ONU
Configure line rate and traffic
shaping for downlink traffic
shaping for downlink traffic
Configure QoS for
downlink traffic
downlink traffic
Assign downlink bandwidth for
each ONU
each ONU