3com S7906E Instrução De Instalação

 

1-5 

Display the public keys of the 
peers  

display public-key peer [ brief 
| name publickey-name ] 

 

As shown in 

, Device A is authenticated by Device B when accessing Device B, so the public 

key of Device A should be configured on Device B in advance. 

In this example: 

z 

RSA is used. 

z 

The host public key of Device A is configured manually on Device B. 

Figure 1-2 Network diagram for manually configuring the public key of a peer 

 

 

 

1)  Configure Device A 

# Create RSA key pairs on Device A. 

<DeviceA> system-view 

[DeviceA] public-key local create rsa 

The range of public key size is (512 ~ 2048). 

NOTES: If the key modulus is greater than 512, 

It will take a few minutes. 

Press CTRL+C to abort. 

Input the bits of the modulus[default = 1024]: 

Generating Keys... 

++++++ 

++++++ 

++++++++ 

++++++++ 

# Display the public keys of the created RSA key pairs. 

[DeviceA] display public-key local rsa public 

 

===================================================== 

Time of Key pair created: 09:50:06  2007/08/07 

Key name: HOST_KEY 

Key type: RSA Encryption Key 

===================================================== 

Key code: