3com S7906E Guia De Referência
1-2
subvlan list:
no subvlan
port list:
no port
Table 1-1 display multicast-vlan ipv6 command output description
Field
Description
Total 4 IPv6 multicast-vlan(s)
Total number of IPv6 multicast VLANs
IPv6 Multicast vlan
An IPv6 multicast VLAN
subvlan list
List of sub-VLANs of the IPv6 multicast VLAN
port list
Port list of the IPv6 multicast VLAN
multicast-vlan ipv6
Syntax
multicast-vlan ipv6 vlan-id
undo multicast-vlan ipv6 { all | vlan-id }
View
System view
Default Level
2: System level
Parameters
vlan-id: Specifies a VLAN by its ID, in the range of 1 to 4094.
all: Deletes all IPv6 multicast VLANs.
Description
Use the multicast-vlan ipv6 command to configure the specified VLAN as an IPv6 multicast VLAN and
enter IPv6 multicast VLAN view.
Use the undo multicast-vlan ipv6 command to remove the specified VLAN as an IPv6 multicast
VLAN.
No VLAN is an IPv6 multicast VLAN by default.
Note that:
z
The specified VLAN to be configured as an IPv6 multicast VLAN must exist.
z
The IPv6 multicast VLAN feature cannot be enabled on a device with IPv6 multicast routing
enabled.
z
For a sub-VLAN-based IPv6 multicast VLAN, you need to enable MLD Snooping only in the IPv6
multicast VLAN; for a port-based IPv6 multicast VLAN, you need to enable MLD Snooping in both
the IPv6 multicast VLAN and all the user VLANs.