Samsung t27a950 Guia Do Utilizador

English

Basic Features

 

O

MENu

m → Support → 

ENTEr

E

Self Diagnosis

 

✎

Self Diagnosis might take few seconds, this is part of 
the normal operation of the TV

 

■

Picture Test (Yes / No): Use to check for 
picture problems.
Yes: If the test pattern does not appear or there is 
noise in the test pattern, select Yes. There may be a 
problem with the TV. Contact Samsung’s Call Centre for 
assistance.
No: If the test pattern is properly displayed, select No. 
There may be a problem with your external equipment. 
Please check your connections. If the problem persists, 
refer to the external device’s user manual.

 

■

Sound Test (Yes / No): Use the built-in melody sound to 
check for sound problems. 

 

✎

If you hear no sound from the TV’s speakers, 
before performing the sound test, make sure 
Speaker Select is set to TV Speaker in the 
Sound menu.

 

✎

The melody will be heard during the test even if 
Speaker Select is set to External Speaker or the 
sound is muted by pressing the 

MuTE

 button.

Yes: If you can hear sound only from one speaker or not 
at all during the sound test, select Yes. There may be a 
problem with the TV. Contact Samsung’s Call Centre for 
assistance.
No: If you can hear sound from the speakers, select No. 
There may be a problem with your external equipment. 
Please check your connections. If the problem persists, 
refer to the external device’s user manual.

 

■

Signal Information: (digital channels only) An HD 
channel’s reception quality is either perfect or the 
channels are unavailable. Adjust your antenna to 
increase signal strength.

 

■

Troubleshooting: If the TV seems to have a problem, 
refer to this description.

 

✎

If none of these troubleshooting tips apply, contact 
the Samsung customer service centre.

Software upgrade

Software upgrade can be performed via a broadcasting 
signal or by network connection or downloading the latest 
firmware from “www.samsung.com,” to a USB memory 
device.

Installing the Latest Version

 

■

By uSB: Insert a USB 
drive containing the 
firmware upgrade file, 
downloaded from 
“www.samsung.com”. 
Please be careful not 
to disconnect the power or remove the USB drive until 
upgrades are complete. The TV will be turned off and 
on automatically after completing the firmware upgrade. 
When software is upgraded, video and audio settings 
you have made will return to their default settings. We 
advise you to write down your settings so that you can 
easily reset them after the upgrade.

 

■

By Online: Upgrade the software using the Internet.

 

✎

First, configure your network. For detailed 
procedures on using the Network Setup, refer to 
the “Network Connection” instructions.

 

✎

If the internet connection doesn’t operate properly, 
the connection may be broken. Please retry 
downloading. If the problem persists, download by 
USB and upgrade.

TV Rear

USB Drive

By USB

By Online
By Channel 
Alternative Software
Standby Mode Upgrade

2hours later