Fujifilm A330 Guia De Configuração Rápida
(USB)
socket
socket
PC
A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images
Viewing images on your PC
A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1.Switch on your PC and start up Windows.
installation is completed.
1.Switch on your PC and start up Windows.
●
!
Users of Windows 2000 Professional or Windows XP should
log in by using a system administrator account (e.g.
“Administrator”).
log in by using a system administrator account (e.g.
“Administrator”).
2.Quit all other active applications until no applications
are shown in the taskbar.
3.Load the enclosed CD-ROM into the CD-ROM drive.
The installer starts up automatically.
4.The Setup screen appears.
Click the [Installing
FinePixViewer] button.
FinePixViewer] button.
5.After installation completed, press [Restart] button.
B. Connect the Camera to your PC
1.Load an xD-Picture Card containing photographed
images into your camera.
2.Set the “USB MODE” setting in the “SET-UP” menu to
digital camera “
¶
”. (Refer to “USING THE SET-UP
SCREEN” in the owner’s manual.)
C. Save images
1.The Save image Wizard starts up. Click the
[
NEXT
]
button.
2.Check that the files are downloaded from the camera
to your PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2004_0312 Image
Ex. \My Documents \ My Pictures \ 2004_0312 Image
D. View images
1.Click the [Show List of Images]
button.
2.Select “Preview” in the View menu to display an
enlarged image.
3.Turn your camera off.
4.If you have one, plug the AC power adapter connector
4.If you have one, plug the AC power adapter connector
into the “DC IN 3V” socket on the camera and then
plug the adapter itself into the main power outlet,
otherwise be sure your batteries are fresh and
charged.
plug the adapter itself into the main power outlet,
otherwise be sure your batteries are fresh and
charged.
5.Use the included USB cable to connect the camera to
your PC.
6.Turn the camera on.
7.
FinePixViewer starts up automatically.
Windows 98/98 SE/Me/2000 Professional
q The “Found New Hardware” help message
appears in the bottom-right corner of your screen.
This message will close when the settings are
completed. No action is required.
This message will close when the settings are
completed. No action is required.
w Specify the settings in the “AutoPlay” dialog box.
e Select “Viewing images using FinePixViewer” and
e Select “Viewing images using FinePixViewer” and
then select the “Always do the selected action”
checkbox.
checkbox.
Windows XP
r Click the [OK] button to launch FinePixViewer.
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or chapter 5
and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
( http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.
and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
( http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.
(USB)socket
Camera
DC IN 3V socket
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
ＵＳＢ
ＵＳＢ ＭＯＤＥ
ＭＯＤＥ
１
2
３
4
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
言語
言語
／ＬＡＮＧ
／ＬＡＮＧ
:
ＥＮＧＬＩＳＨ
ＥＮＧＬＩＳＨ
ＶＩＤＥＯ ＳＹＳＴＥＭ
ＶＩＤＥＯ ＳＹＳＴＥＭ
:
ＮＴＳＣ
ＮＴＳＣ
ＯＫ
ＯＫ
ＯＫ
ＤＩＳＣＨＡＲＧＥ
ＤＩＳＣＨＡＲＧＥ
: