Lexmark 3100 Manual Do Utilizador

Note: If you press Duplex and no duplex lights come on, no duplex functions can be 

performed. This response occurs if the printer does not have duplex capabilities.

Collation is turned off by default. To turn collation on, press Collation/Finishing until you see 

 in the control panel display, and then press Select. Turning collation on produces complete, 

ordered copies of the original.

Finishing features (such as stapling or hole punch) are only available if your printer supports finishing 
functions. If your printer does not support finishing, only collation is supported. 

This process of saving paper is sometimes referred to as N-up. Some features share a panel light. 
For example, the same panel light is on for both 4-up and 4-up Landscape printing.

Two single-sided originals are copied 
to one two-sided copy (long edge or 
short edge).

1 > 2

1 > 2 short edge

One double-sided original is copied to 
two single-sided copies.

2 > 1 

(available only if scanner 
supports duplex)

A double-sided original is copied to a 
double-sided copy.

2 > 2

(available only if scanner 
supports duplex)