Lexmark 3100 Manual Do Utilizador
Create a scan profile
13
3
On the control panel, press Fax/Scan Mode repeatedly until you see
SCAN
→
PROFILE
.
4
Press Menu > repeatedly until you see your scan profile name.
5
Press Go/Send to start scanning.
Note: If you are using the flatbed of the scanner, watch the control panel for messages.
If prompted to
Place Next Or Stop
, place the next page on the flatbed and then
press Go/Send to continue scanning. Press Stop/Clear when all the pages have
been scanned.
been scanned.
6
Return to your computer. Your output file is saved in a directory or launched in the application
you specified.
you specified.
Use the MarkNet Web pages
The MarkNet™ resident Web pages are stored on the MarkNet print server installed in your MFP.
Step 1: Set up your scan profile
1
Type the IP address of the MFP in the URL field of your browser, and then press Enter.
2
Click Create Scan Profiles.
3
Click PC Scan Profile.
4
Select your scan settings. For more explanation about the settings, see “Custom Scan to PC
settings” on page 14.
settings” on page 14.
5
Click Next.
Step 2: Select a storage location
1
Specify a path and file name for saving the scan output file somewhere on your PC. For
example, browse to your desktop, find the appropriate directory, and type in a file name.
example, browse to your desktop, find the appropriate directory, and type in a file name.
2
Assign a Profile Name. This is the name that appears in the SCAN
→
PROFILE list on the
MFP control panel.
3
Click Submit. A Receiving Image window appears on your desktop indicating that your PC is
waiting to receive the scan output file.
waiting to receive the scan output file.
Step 3: Scan your original documents
1
Locate the MFP you specified in the scan profile.
2
Load all pages in the automatic document feeder of the scanner. Place the pages according
to the drawing on the scanner.
to the drawing on the scanner.
3
On the control panel, press Fax/Scan Mode repeatedly until you see
SCAN
→
PROFILE
.