Lexmark 3100 Manual Do Utilizador
Scanning to e-mail
16
4
Scanning to e-mail
Create a scan to e-mail profile
A scan profile includes all the necessary information about your originals and presets the MFP
control panel to those settings.
control panel to those settings.
Scan profiles are temporary destinations. A maximum of ten scan profiles can be stored. When the
eleventh profile is created, the oldest is discarded.
eleventh profile is created, the oldest is discarded.
Step 1: Set up your scan profile
1
Type the IP address of the MFP in the URL field of your browser, and then press Enter.
2
Click Create Scan Profiles.
3
Click E-mail Scan Profile.
4
Specify the recipient and the sender. You can assign a subject and add a message to the
content of the e-mail.
content of the e-mail.
5
Select the scan type, resolution, and size of the original.
6
Specify whether the file is to be sent as an e-mail attachment or as a Web link.
•
Attachment -- a copy of the scanned document is sent attached to the e-mail message
•
Web link -- the scanned document is sent to a storage area on a Web site and a Web link
to that site is sent to the e-mail recipient
to that site is sent to the e-mail recipient
7
Assign a profile name.
8
Click Submit.
Step 2: Scan your original documents
1
Locate the MFP. This must be the same MFP where the scan profile is stored.
2
Load all pages in the automatic document feeder of the scanner. Place the pages according
to the drawing on the scanner.
to the drawing on the scanner.
3
On the control panel, press Fax/Scan Mode repeatedly until you see
SCAN
→
PROFILE
.
4
Press Menu > repeatedly until you see your scan profile name.