Fujifilm S100FS Manual Do Utilizador

96

[SHOOTING MENU]

• The image may appear dark when the shutter speed is 

set to speeds higher than 1/1000 sec.

• Set  [A WHITE BALANCE] (

➝p.91) to [AUTO] or 

custom white balance (

➝p.92).

• If you pop up the built-in flash when [

 EXTERNAL 

FLASH] is set to [ON], the built-in flash fires once as a 
signal for the external flash to fire. The hot shoe and the 
synchronizing terminal do not make a signal for flash.

• Flash cannot be used when [f CONTINUOUS] 

(

➝p.81) is selected.

• Ordinary external flash units can be used. However, 

some camera-specific flash units cannot be used.

• Compatible flash units must meet the following 3 

conditions;
- The aperture can be set.
- External flash synchronization can be used.
- The sensitivity can be set.

• If white balance is incorrect, adjust it by selecting [

 

CUSOTM 1] or [

 CUSTOM 2] in [A WHITE 

BALANCE] of [SHOOTING MENU] (

➝p.91).

Attach the synchronization cord from the external flash to the 
Synchronizing terminal on the camera by pushing the cord into 
the terminal securely.

Synchronizing terminal

Synchronizing terminal cap

Synchronization cord

Setting the menu (

➝p.85)