Lexmark e230 Guia De Referência
PJL
3-48
Common Variables for PCL Emulation
Note:
The word common applies to those variables common to both your printer
and the Hewlett-Packard Company’s LaserJet printers.
and the Hewlett-Packard Company’s LaserJet printers.
Use these variables only for PCL emulation. The
[command modifier:value]
parameter should be specified as
LPARM
:
PCL
. For example:
@PJL SET LPARM:PCL FONTSOURCE=I<CR><LF>
To determine which variables your printer supports, see “Table B-3: Common
Variables for PCL Emulation” on page B-11.
Variables for PCL Emulation” on page B-11.
Table 3-5: Common Variables for PCL Emulation
Variable
Function
Selections
Factory Default
FONTNUMBER
Font Number
0, 1, .... n
0
FONTSOURCE
Font Source
I, S, M1, M2, M3, M4, D1
I
Internal font source
S
Permanent download fonts
M1, M2,
M3, M4
M3, M4
Flash font source
D1
Disk font source
All other values default to internal font source.
I
PITCH
Default pitch
(fixed-pitch fonts)
(fixed-pitch fonts)
0.08 to 100 (in increments of 0.01)
Note: If an invalid pitch is requested, the printer
selects the closest pitch.
selects the closest pitch.
10.00
PTSIZE
Default point size
(proportional
spaced fonts)
(proportional
spaced fonts)
1 to 1008 (in increments of 0.25)
Note: If an invalid point size is requested, the
printer selects the closest point size.
printer selects the closest point size.
12.00
SYMSET
Symbol set for the
default font
default font
For a list of the values for the Lexmark X422,
see “Font and Symbol Set Support for the
Lexmark X422” on page 2-9.
see “Font and Symbol Set Support for the
Lexmark X422” on page 2-9.
For a list of the values for the Lexmark C510(n),
see “Font and Symbol Set Support for the
Lexmark C510(n)” on page 2-19.
see “Font and Symbol Set Support for the
Lexmark C510(n)” on page 2-19.
If a symbol set is requested that is not resident
in the printer, the symbol set is not changed.
in the printer, the symbol set is not changed.
PC8, PC850
(Country specific)
(Country specific)