Lexmark c752 Manual Do Utilizador
28
Install memory, firmware, or option cards
Installing an option card
Your printer has one expansion card slot
that supports a number of option cards.
The following table describes their
function.
that supports a number of option cards.
The following table describes their
function.
Note:
The network models ship with an Ethernet print
server already installed.
You need a small Phillips screwdriver to
install these options.
install these options.
1
Remove the system board access
cover (see Page 22).
cover (see Page 22).
2
Remove the screw from the metal
plate that covers the connector
slot, and then lift the plate off.
plate that covers the connector
slot, and then lift the plate off.
Save the screw.
Warning:
Option cards are easily damaged by static
electricity. Touch something metal on the printer before
you touch an option card.
you touch an option card.
3
Unpack the option card.
Save the packing materials.
Card
Function
MarkNet internal print server
Adds an Ethernet or Token-Ring port so you can connect your printer to a
network.
network.
Install a MarkNet™ N2501e or N2401e internal print server if you received
either of these cards as part of a multifunction printer upgrade.
either of these cards as part of a multifunction printer upgrade.
Parallel 1284-B Interface Card
Adds a parallel port.
Coax/Twinax Adapter for SCS
Adds a coaxial/twinaxial port.
Serial Interface Card
Adds a serial port.