LG BD430 Manual Do Proprietário

Installation

Connecting to the AC power cord

This projector uses nominal input voltages of 100-

240 V AC and it automatically selects the correct

input voltage. It is designed to work with a single-

phase power system having a grounded neutral

conductor. To reduce the risk of electrical shock,

do not plug into any other type of power system.

If you are not sure of the type of power being

supplied, consult your authorized dealer or service

center.

Connect the projector with all peripheral

equipment before turning it on.

Connect the AC power cord

(supplied) to the projector.

The AC outlet should be near this equipment and must be easily accessible.

√ Note:

Unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet

with AC power cord, it is in stand-by mode and consumes a little electric power.

Note on the power cord

AC power cord must meet the requirements of the country where you use the projector. Confirm the AC

plug type with the chart below and proper AC power cord must be used.

Projector side

AC outlet side

For the U.S.A. and

Canada

For Continental

Europe

For the U.K.

√ Note:

● Using incorrect power cord may influence the product performance, or even cause hazards like an

electric shock or fire. To ensure the product performance and security, please apply the cable of the

same model with the original one.

● Common connecting cables include the AC power cord, various RGB cables, video cable,and serial

control cable.

To power cord

connector on your

projector.

Ground

To the AC outlet.

(110 V AC)

To the AC outlet.

(200 - 240 V AC)

To the AC outlet.

(200 - 240 V AC)

Ground