LG F1496QDW3 Guia Do Utilizador

If you install the washing machine on a slippery surface, 
it may move because of excessive vibration. Incorrect 
leveling may cause malfunction through noise and 
vibration. If this occurs, install the non-skid pads under 
the leveling feet and adjust the level.

 Clean the floor to attach the non-skid pads.
•

Use a dry rag to remove and clean foreign 
objects and moisture. If moisture remains, the 
non-skid pads may slip.

Adjust the level after placing the washing machine 
in the installation area.

Place the adhesive side of the non-skid pad on the 
floor.
•

It is most effective to install the non-skid pads 
under the front legs. If it is difficult to place the 
pads under the front legs, place them under the 
back legs.

This side up

Adhesive side

Ensure the washing machine is level.
•

Push or rock the top edges of the washing 
machine gently to make sure that the washing 
machine does not rock. If the washing machine 
rocks, level the washing machine again.

•

Wooden floors are particularly susceptible to vibration.

•

To prevent vibration we recommend you place rubber 
cups at least 15 mm thick of the each foot of the 
washing machine, secured to at least two floor beams 
with screws.

Rubber Cup

•

If possible install the washing machine in one of the 
corners of the room, where the floor is more stable.

•

Fit the rubber cups to reduce vibration.

•

You can obtain rubber cups (p/no.4620ER4002B) from 
the LG Service Centre.

•

Proper placement and leveling of the washing 
machine will ensure long, regular, and reliable 
operation.

•

The washing machine must be 100% horizontal 
and stand firmly in position.

•

It must not ‘Seesaw’ across corners under the 
load.

•

The installation surface must be clean, free from 
floor wax and other lubricant coatings.

•

Do not let the feet of the washing machine get 
wet. Failure to do so may cause vibration or noise.

,