LG F1496QDW3 Guia Do Utilizador

Página de 336
34
TROUBLESHOOTING
Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at 
an early stage. If your washing machine does not function properly or does not function at all, check the following 
before you call for service:
Diagnosing Problems
Symptoms
Reason
Solution
Rattling and clanking 
noise
Foreign objects such as coins 
or safety pins may be in drum or 
pump.
Stop washing machine, check drum and 
drain filter.
If noise continues after washing machine 
is restarted, call your authorised service 
centre.
Thumping sound
Heavy wash loads may produce a 
thumping sound. This is usually 
normal.
If sound continues, washing machine 
is probably out of balance. Stop and 
redistribute wash load.
Vibrating noise
Have all the transit bolts and tub 
support been removed?
If not removed during installation, refer 
to Installation guide for removing transit 
bolts.
Are all the feet resting firmly on 
the ground?
Wash load may be unevenly distributed 
in drum. Stop washing machine and 
rearrange wash load.
Water leaks
Inlet hoses or drain hose are 
loose at tap or washing machine.
Check and tighten hose connections.
House drain pipes are clogged.
Unclog drain pipe. Contact plumber if 
necessary.
Oversudsing
Too much detergent or unsuitable 
detergent may cause excessive foaming 
which may result in water leaks.
Water does not enter 
washing machine or it 
enters slowly
Water supply is not adequate in 
that location.
Check another tap in the house.
Water supply tap is not 
completely open.
Fully open tap.
Water inlet hose(s) are kinked.
Straighten hose.
The filter of the inlet hose(s) 
clogged.
Check the filter of the inlet hose.
Water in the washing 
machine does not drain 
or drains slowly
Drain hose is kinked or clogged.
Clean and straighten the drain hose.
The drain filter is clogged.
Clean the drain filter.