Sony VGF-HS1 Manual
VGF-HS1 3-98-360-11(1)
Restoring Your Home Server
You can restore the factory default settings while keeping hard drive content. For information on the state
of your Home Server after restoring your Home Server, see “State of the Home Server after Restoring the
Home Server or the System” on page 56.
1
Access the Home Server Settings Page (page ).
2
Click “Reset” in the left pane.
The Reset page is displayed in the right pane.
3
Click “Restore defaults.”
On the confirmation page, click “OK.”
The Rebooting page is displayed and the Home Server restarts.
The (POWER) indicator light on the Home Server blinks in orange until the restoring
process is completed.
Upon completion, the (POWER) indicator light stays lit in green.
Tip
Restoring the Home Server may change the IP address of the Home Server Settings Page. Proceed with either of
the following procedures to access the Home Server Settings Page:
Accessing from the PC Link software
Start the PC Link software (page 19).
On the main window, click the server name of your Home Server in the Back Up section.
Accessing by entering the IP address
Press the DISPLAY button several times until the IP address appears on the display on the Home Server.
Start your browser software on the personal computer and enter the IP address in the URL address field.