Sony DSLR-A700 Manual

1 page 32

The default settings are marked with 

.

You can adjust the brightness of the LCD monitor.

1

Select [LCD brightness], then press the center of the multi-selector.

2

Adjust the brightness with b/B on the multi-selector, then press the center of the multi-selector.

• On the recording information or playback screen, you can adjust the brightness by pressing the DISP 

(Display) button a little longer.

During shooting, the recording information display appears on the LCD monitor. You can 
change the displayed time of the display.

• The display appears again if you press the shutter button halfway down or perform some other operation.

If you do not operate the camera for given period of time, the camera turns to power saving 
mode and almost completely shuts down (Power Save). 

t

 step 4 in “Read This First”

You can set the time to turn the camera to the power save mode.

• Pressing the shutter button halfway down returns the camera to the recording mode.

1 min

Displays for one minute.

30 sec

Displays for 30 seconds.

10 sec

Displays for 10 seconds.

5 sec

Displays for five seconds.

30 min

The camera turns to power save mode after 30 minutes.

10 min

The camera turns to power save mode after 10 minutes.

5 min

The camera turns to power save mode after five minutes.

3 min

The camera turns to power save mode after three minutes.

1 min

The camera turns to power save mode after one minute.