Honeywell Prestige IAQ Comfort System Guia Da Instalação
2-wire Prestige® IAQ and RF EIM
2
69-2445EFS—03
MCR29241
MCR32386
Mount and wire thermostat
1
Drywall: 3/16" hole
Plaster: 7/32" hole
Plaster: 7/32" hole
Wall anchor
Mounting
screw
Connect the two wires from the thermostat to the Equipment Interface
Module R and C terminals or to a separate 24 volt transformer (not pro-
vided).
Module R and C terminals or to a separate 24 volt transformer (not pro-
vided).
Wiring must comply with local electrical codes.
Pull wiring through hole in wall plate and install as shown below.
Strip 1/4" insulation and connect wires to screw terminals as shown.
Strip 1/4" insulation and connect wires to screw terminals as shown.
MCR32387
MCR32389
R
C
Y
Y2
G
L
W O/
B
W2 AUX1
W3 AUX2
Strip 1/4” insulation, then insert wires as shown.
Mount and wire Equipment Interface Module
2
Use screws & anchors (not included) as appropriate for mounting surface.
Mount Equipment Interface Module on wall near HVAC equipment, or on
the equipment itself.
Do not install inside HVAC equipment.
Mount Equipment Interface Module on wall near HVAC equipment, or on
the equipment itself.
Do not install inside HVAC equipment.
MCR32388