Zanussi ZEV6340NBA Manual Do Utilizador

The hob deactivates.

You put something on the sen-
sor field  .

Remove the object from the

sensor field.

Residual heat indicator does

not come on.

 The zone is not hot because it

operated only for a short time.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.

The sensor fields become hot.

The cookware is too large or

you put it too near to the con-

trols.

Put large cookware on the rear

zones if possible.

 comes on.

Automatic Switch Off oper-

ates.

Deactivate the hob and acti-

vate it again.

 comes on.

The Child Safety Device func-

tion operates. 

Refer to "Daily use" chapter.

 and a number come on.

There is an error in the hob.

Disconnect the hob from the

electrical supply for some time.

Disconnect the fuse from the

electrical system of the house.
Connect it again. If   comes

on again, speak to an Author-

ised Service Centre.

IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service

Centre. Give the data from the rating plate. Give

also three digit letter code for the glass ceramic (it

is in the corner of the glass surface) and an error

message that comes on. Make sure, you operated

the hob correctly. If not the servicing by a service

technician or dealer will not be free of charge, also

during the warranty period. The instructions about

the Service Centre and conditions of guarantee are

in the guarantee booklet.

WARNING! Refer to Safety chapters.

BEFORE THE INSTALLATION
Before you install the hob, write down the

information bellow from the rating plate. The rating

plate is on the bottom of the hob.

Serial number ...........................

BUILT-IN HOBS
Only use the built-in hobs after you assemble the

hob into correct built-in units and work surfaces

that align to the standards.

CONNECTION CABLE
• The hob is supplied with a connection cable.

• To replace the damaged mains cable use the

following (or higher) mains cable type:

H05V2V2-F T min 90°C. Speak to your local

Service Centre.