Zanussi ZOK37901XB Manual Do Utilizador

3. Press   or   to set the minutes and the

hours for DURATION time.

4. Press   to confirm.

When the time ends an acoustic signal sounds
for 2 minutes. 

 and time setting flash in the

display. The appliance deactivates

automatically.

5. Press any button to stop the acoustic

signal.

6. Turn the knob for the oven functions to the

off position.

1. Set an oven function.
2. Press   again and again until 

 starts to

flash.

3. Press   or   to set the hours and the

minutes for END time.

4. Press   to confirm.

At the set time an acoustic signal sounds for 2
minutes. 

 and time setting flash in the

display. The appliance deactivates

automatically.

5. Press any button to stop the acoustic

signal.

6. Turn the knob for the oven functions to the

off position.

1. Set an oven function.
2. Press   again and again until 

 starts to

flash.

3. Press   or   to set the minutes and the

hours for DURATION time.

4. Press   to confirm. The display shows

flashing 

.

5. Press   or   to set the hours and the

minutes for END time.

6. Press   to confirm.

Appliance turns on automatically later on, works

for the set DURATION time and stops at the set

END time. At the set time an acoustic signal
sounds for 2 minutes. 

 and time setting flash

in the display. The appliance deactivates.

7. Press any button to stop the acoustic

signal.

8. Turn the knob for the oven functions to the

off position.

1. Press  .

 and "00" flash in the display.

2. Press   or   to set the MINUTE

MINDER.

First you set the seconds, then the minutes.

When the time you set is longer than 60
minutes, 

 flash in the display.

3. Set the hours.

4. The MINUTE MINDER starts automatically

after 5 seconds.

After 90% of the set time, an acoustic

signal sounds.

5. When the set time ends, an acoustic signal

sounds for 2 minutes. "00:00" and   flash

in the display. Press any button to stop the

acoustic signal.

To reset the Count Up Timer, press and hold 
and  . The timer starts to count up again.

Refer to Safety chapters.

Wire shelf:
Push the shelf between the guide bars of the

shelf support and make sure that the feet point

down.