Zanussi ZDI26001XA Manual Do Utilizador
SETTINGS
PROGRAMME SELECTION MODE
The appliance is in Programme selection mode when, after the activation, the display shows number of the
programme Eco.
• The display shows the programme duration after some seconds.
When the appliance is in Programme selection mode it is possible to set a programme.
When the appliance is in Programme selection mode it is possible to set a programme.
If the control panel does not show this condition, do the Cancel.
CANCEL FUNCTION
Press and hold simultaneously
and
until the appliance is in programme selection mode.
With this function you can cancel the running programme or the delay start.
USER MODE
While the appliance is in programme selection mode:
1. Press and hold
1. Press and hold
and
.
• The indicators
,
and
starts to flash.
In user mode can be changed:
• The level of the water softener according to the water hardness.
• The level of the water softener according to the water hardness.
• The activation or deactivation of the rinse aid empty notification.
These settings will be saved until you change them again.
These settings will be saved until you change them again.
23