Zanussi ZEI6740BBA Manual Do Utilizador

Refer to Safety chapters.

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have

no effect on how the hob operates.

• Use a special cleaner applicable for the

surface of the hob.

• Use a special scraper for the glass.

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not, the

dirt can cause damage to the hob. Put the

special scraper on the glass surface at an

acute angle and move the blade on the

surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob

with a moist cloth and some detergent. After

cleaning, rub the hob dry with a soft cloth.

Refer to Safety chapters.

You cannot activate or operate

the hob.

The hob is not connected to an

electrical supply or it is connec-

ted incorrectly.

Check if the hob is correctly con-

nected to the electrical supply.

Refer to the connection diagram.

 

The fuse is released.

Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

 

 

Activate the hob again and set

the heat setting in less than 10

seconds.

 

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

 

There is water or fat stains on the

control panel.

Clean the control panel.

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds when

the hob is deactivated.

You put something on one or

more sensor fields.

Remove the object from the sen-

sor fields.