Zanussi ZEI6740BBA Manual Do Utilizador

Página de 52
Daily use
WARNING!
Refer to Safety chapters.
Activating and deactivating
Touch   for 1 second to activate or deactivate
the hob.
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting
or move your finger along the control bar until
you reach the correct heat setting.
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for some
time and then decreases to the correct heat
setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking
zone:
 touch   (  comes on). Immediately
touch the correct heat setting. After 3 seconds
 comes on.
To deactivate the function: change the heat
setting.
Power function
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for
a limited period of time. After this time the
induction cooking zone automatically sets back
to the highest heat setting.
Refer to “Technical information”
chapter.
To activate the function for a cooking
zone:
 touch  .   comes on.
To deactivate the function: change the heat
setting.
Timer
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single
cooking session.
First set the cooking zone then set the
function. You can set the heat setting before
or after you set the function.
To set the cooking zone: touch   again and
again until the indicator of a necessary cooking
zone comes on.
To activate the function or change the
time:
 touch   or   of the timer to set the
time (00 - 99 minutes). When the indicator of
the cooking zone starts to flash slowly the time
counts down.
To see the remaining time: set the cooking
zone with  . The indicator of the cooking zone
starts to flash quickly. The display shows the
remaining time.
To deactivate the function: set the cooking
zone with   and touch  . The remaining time
counts back to 00. The indicator of the cooking
zone goes out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch  .
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking
zones do not operate (the heat setting display
shows  ).
To activate the function: touch  . Touch 
or   of the timer to set the time. When the
www.zanussi.com
7