Zanussi ZRA25600WA Manual Do Utilizador

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

WARNING! Refer to Safety chapters.

POSITIONING
Install the appliance in a dry, well ventilated indoors

where the ambient temperature corresponds to the

climate class indicated on the rating plate of the

appliance.

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Some functional problems might occur

for some types of models when

operating outside of that range. The

correct operation can only be

guaranteed within the specified

temperature range. If you have any

doubts regarding where to install the

appliance, please turn to the vendor,

to our customer service or to the

nearest Authorised Service Centre.

REAR SPACERS
In the bag with the documentation, there are two

spacers which must be fitted as shown in the

figure.
1. Fit the spacers into the holes. Make sure that

the arrow (A) is positioned as shown in the

picture.

45°

45°

2. Turn counter-clockwise the spacers through

45° until they lock into place.

Refer to the assembly instructions for

the installation.

To ensure best performance, install the appliance

well away from sources of heat such as radiators,

boilers, direct sunlight etc. Make sure that air can

circulate freely around the back of the cabinet.

ELECTRICAL CONNECTION
• Before plugging in, ensure that the voltage and

frequency shown on the rating plate correspond

to your domestic power supply.

• The appliance must be earthed. The power

supply cable plug is provided with a contact for

this purpose. If the domestic power supply

socket is not earthed, connect the appliance to

a separate earth in compliance with current

regulations, consulting a qualified electrician.

• The manufacturer declines all responsibility if

the above safety precautions are not observed.

• This appliance complies with the E.E.C.

Directives.