Zanussi ZOA35526XK Manual Do Utilizador

You must set the time before you operate the

oven.
The indicator for the Time of day function

flashes when you connect the appliance to the

electrical supply, when there was a power cut

or when the timer is not set.

Press the   or   button to set the correct

time.

After approximately five seconds, the flashing

stops and the display shows the time of day you

set.

You cannot change the time of day if
the Duration 

 or End 

 function

operates.

Press   again and again until the indicator for

the Time of Day function flashes.

To set a new time, refer to "Setting the time".

Preheat the empty appliance to burn off the

remaining grease.

1. Set the function   and the maximum

temperature.

2. Let the appliance operate for 1 hour.
3. Set the function   and set the maximum

temperature.

4. Let the appliance operate for 15 minutes.

Accessories can become hotter than usual. The

appliance can emit an odour and smoke. This is

normal. Make sure that the airflow in the room is

sufficient.

Refer to Safety chapters.

• The indicator comes on when the

oven heats up.

• The lamp comes on when the

appliance operates.

• The symbol shows whether the

knob controls the oven functions

or the temperature.

1. Turn the knob for the oven functions to

select an oven function.

2. Turn the knob for the temperature to select

a temperature.

3. To deactivate the appliance turn the knobs

for the oven functions and temperature to

the off position.

Off position

The appliance is off.

Light

To activate the lamp without a cooking function.

Grilling

To grill flat food and to toast bread.