Zanussi ZCG63040WA Manual Do Utilizador

WARNING! Refer to Safety chapters.

GENERAL INFORMATION
• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have no

effect on how the hob operates.

• Use a special cleaner applicable for the surface

of the hob.

• Wash stainless steel parts with water, and then

dry them with a soft cloth.

The pan supports are not resistant to

washing in a dishwasher. They must

be washed by hand.

1. Remove the pan supports to easily clean the

hob. 

Be very careful when you replace

the pan supports to prevent the

hob top from damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash the

pan supports by hand and dry them. If

necessary, remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make sure

that the arms of the pan supports are aligned

with the centre of the burner.

CLEANING THE HOB
• Remove immediately: melted plastic, plastic

foil, and food with sugar. If not, the dirt can

cause damage to the hob.

• Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny

metallic discoloration. Clean the hob with a

moist cloth and non-abrasive detergent. After

cleaning, wipe the hob dry with a soft cloth.

• To clean the enamelled parts, cap and crown,

wash them with warm soapy water and dry them

carefully before you put them back on.

CLEANING THE SPARK PLUG
This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these

components well clean to prevent difficult lighting

and check that the burner crown holes are not

obstructed.

WARNING! Refer to Safety chapters.

COOLING FAN
When the appliance operates, the cooling fan

activates automatically to keep the surfaces of the

appliance cool. If you deactivate the appliance, the

cooling fan can continue to operate until the

appliance cools down.

If there is a defect in the cooling fan,

contact the Authorised Service

Centre.

CAUTION! When the oven is active,

the lid has to be opened to avoid over-

heating.

Keep the oven door open when you

ignite the burner.

The oven burners have a

thermocouple. It stops the gas flow, if

the flame goes out.

You cannot operate the top oven

burner, when the grill is active.

1. Open the oven door.

2. Push the knob for the top oven and turn it

counterclockwise to   to ignite the top oven

burner.