Zanussi ZCI68000BA Manual Do Utilizador

 /   /   There is a risk of burns

from residual heat. The indicator

shows the level of the residual heat.

The induction cooking zones make the heat

necessary for cooking process directly in the

bottom of the cookware. The glass ceramic is

heated by the heat of the cookware.

To set or change the heat setting turn the knob

to the correct heat setting. To deactivate turn
the knob to off position  .

automatically if:
• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something on the

control panel for more than 10 seconds (a

pan, a cloth, etc.). An acoustic signal sounds

and the hob deactivates. Remove the object

or clean the control panel.

• the hob gets too hot (e.g. when a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

• you use incorrect cookware. The symbol 

comes on and the cooking zone deactivates

automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time 

comes on and the hob deactivates.

1 - 2

6 hours

3 - 4

5 hours

5

4 hours

6 - 9

1.5 hour

If you activate this function you can get a

necessary heat setting in a shorter time. The

function sets the highest heat setting for some

time and then decreases to the correct heat

setting.

To activate the function the cooking

zone must be cold.

zone: turn the knob for a cooking zone to
position A.   comes on in the display.

Immediately set the correct heat setting.
To deactivate the function: turn the knob to

the off position.

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for

a limited period of time. After this time the

induction cooking zone automatically sets back

to the highest heat setting.
To activate the function for a cooking
zone: touch 

.   comes on.

To deactivate the function: change the heat

setting.

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single

cooking session.
First set the cooking zone then set the

function. You can set the heat setting before

or after you set the function.

To set the cooking zone: touch   again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function: touch   of the

timer to set the time (00 - 99 minutes). When

the indicator of the cooking zone starts to flash

slowly the time counts down.
To see the remaining time: set the cooking
zone with  . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.