Zanussi ZCV46330WA Manual Do Utilizador

Página de 24
We recommend that you write the data here:
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
WARNING!
Refer to Safety chapters.
Technical data
Dimensions
Height
894 - 912 mm
Width
550 mm
Depth
600 mm
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
A
A
B
Minimum distances
Dimension
mm
A
2
B
685
Levelling of the appliance
Use small feet on the bottom of appliance to set
the appliance top surface level with other
surfaces.
Electrical installation
WARNING!
The manufacturer is not responsible
if you do not follow the safety
precautions from Safety chapters.
This appliance is supplied without a main plug
or a main cable.
Covering terminal board
• The recommended cross-section area is six
square millimetres (6 mm²).
• When you refit the mains terminal cover,
make sure that the lower tabs are located
inside the bottom edge of the aperture,
before you fix the two screws into the top
edge of the mains terminal cover.
• Make sure that the cover is securely
fastened.
www.zanussi.com
19