Zanussi ZCV68310WA Manual Do Utilizador

The   flashes when you connect the appliance

to the electrical supply, when there was a

power cut or when the timer is not set.

Press the   or   to set the correct time.

After approximately five seconds, the flashing

stops and the display shows the time of day you

set.

You cannot change the time of day if
the Duration 

 or End 

 function

operates.

Press   again and again until the indicator for

the Time of Day function flashes.

To set a new time, refer to "Setting the time".

Preheat the empty appliance to burn off the

remaining grease.

Preheat the two ovens. Heat up one

oven at a time.

Set the functions listed below, if

applicable.

1. Set the function   and the maximum

temperature.

2. Let the appliance operate for 1 hour.
3. Set the function   and set the maximum

temperature.

4. Let the appliance operate for 15 minutes.
5. Set the function   and set the maximum

temperature.

6. Let the appliance operate for 15 minutes.

Accessories can become hotter than usual. The

appliance can emit an odour and smoke. This is

normal. Make sure that the airflow in the room is

sufficient.

Refer to Safety chapters.

Off position

Heat settings

Use the residual heat to decrease

energy consumption. Deactivate the

cooking zone approximately 5 - 10

minutes before the cooking process

is completed.

Turn the knob to a necessary heat setting.

To complete the cooking process, turn the knob

to the off position.

There is a risk of burns from residual

heat.

The indicator comes on when a cooking zone is

hot.

Refer to Safety chapters.

The bottom of the cookware must be

as thick and flat as possible.

Cookware made of enamelled steel

and with aluminium or copper

bottoms can cause the colour

change on the glass-ceramic

surface.