Zanussi ZEI6740BBA Manual Do Utilizador

Refer to Safety chapters.

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have

no effect on how the hob operates.

• Use a special cleaner applicable for the

surface of the hob.

• Use a special scraper for the glass.

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar. If not,

the dirt can cause damage to the hob. Take

care to avoid burns. Put the special scraper

on the glass surface at an acute angle and

move the blade on the surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob

with a moist cloth and non-abrasive

detergent. After cleaning, wipe the hob dry

with a soft cloth.

• Remove shiny metallic discoloration:

use a solution of water with vinegar and

clean the glass surface with a moist cloth.

Refer to Safety chapters.

You cannot activate or operate

the hob.

The hob is not connected to an

electrical supply or it is connec-

ted incorrectly.

Check if the hob is correctly con-

nected to the electrical supply.

Refer to the connection diagram.

 

The fuse is blown.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

 

 

Activate the hob again and set

the heat setting in less than 10

seconds.

 

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

 

There is water or fat stains on the

control panel.

Clean the control panel.

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds when

the hob is deactivated.

You put something on one or

more sensor fields.

Remove the object from the sen-

sor fields.