Zanussi ZWF71463W Manual Do Utilizador

To use liquid detergent:

1. Remove the drawer.

Push the drawer edge in

the place with the arrow

(PUSH) to remove the

drawer easily.

2. Adjust the flap in

position B.

3. Put back the drawer in

the recess.

When you use the liquid detergent:

• Do not use gelatinous or thick

liquid detergents.

• Do not put more liquid then 120

ml.

• Do not set the delay start.

When the flap is in

position B and you want

to use powder detergent:

1. Remove the drawer.

2. Adjust the flap in

position A.

3. Put back the drawer

in the recess.

• Measure out the detergent and the fabric

conditioner.

• Put the detergent and the fabric conditioner

into the compartments.

• Carefully close the detergent drawer.

Press and hold for a couple of seconds the 

button to activate or deactivate the appliance.

A tune sounds when the appliance is activated.

The appliance performs a start up animation.

The animation quickly shows each washing

programme and the default temperature and

spin settings.

The display shows the word On.

1. Touch the programme button   and set the

programme:

• The indicator of the button 

 flashes.

• The display shows the programme

duration.

2. If necessary, change the temperature and

the spin speed or add available options.

When you activate an option, the indicator

of the set option comes on.

If you set something incorrect, the
display shows the message 

.

Touch the button 

 .

• The indicator of the button 

 stops to

flash and stays on.

• The programme starts, the door locks,

the indicator 

 is on.

• The drain pump can operate for a short

time at the beginning of the washing

cycle.

After approximately 15 minutes from

the start of the programme:

• The appliance adjusts

automatically the programme

duration agree with the laundry

load.

• The display shows the new value.

1. Touch the button   again and again to

choose the number of hours in which you

want the washing cycle to be finished.

The display shows the number of hours you set
(e.g. 

) and the indicator above the button 

is on to show that his option is active.
2. Touch the button 

 :

• The door is locked.

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.