Zanussi ZBF22456S1 Manual Do Utilizador

• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral
As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:
1. Connect the wire coloured green and yellow to

the terminal marked either with the letter “E“ or
by the earth symbol   or coloured green and

yellow.

2. Connect the wire coloured blue to the terminal

either marked with the letter “N“ or coloured

black.

3. Connect the wire coloured brown to the

terminal either marked with the “L“ or coloured

red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp (E) is secure over

the outer sheath.

Make sure the electricity supply voltage is the

same as that indicated on the appliance rating

plate.

5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse (B).

In the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362)

fuse must be used.

WARNING! A cut off plug inserted

into a 13 amp socket is a serious

safety (shock) hazard. Ensure that it is

disposed of safely.

VENTILATION REQUIREMENTS
The airflow behind the appliance must be sufficient.

5 cm

min. 200cm

2

min.

200cm

2

Dimensions of the recess

 

 

Height

mm

1780

Width

mm

560

Depth

mm

550

Rising time

Hours

24

Voltage

Volts

230-240

Frequency

Hz

50