Fujifilm X-T1 Manual

The DRIVE Dial

 Select one of the following options using a function button (

P 40; at default settings, bracketing 

program selection is assigned to the Fn1 button) or the shooting menu (

P 77).

Select a bracketing amount.  Each time the shutter button is pressed, the camera will take three shots: 
one using the metered value for exposure, the second overexposed by the selected amount, and the third 
underexposed by the same amount (regardless of the amount selected, exposure will not exceed the limits 
of the exposure metering system).

Select a bracketing amount.  Each time the shutter is released, the camera will take a picture at the current 
sensitivity (

P 50) and process it to create two additional copies, one with sensitivity raised and the other 

with sensitivity lowered by the selected amount (regardless of the amount selected, sensitivity will not 
exceed ISO 6400 or fall below ISO 200).

Select a bracketing type.  Each time the shutter is released, the camera takes one shot and processes it to 
create copies with the selected fi lm simulation settings (

P 42).

Each time the shutter button is pressed, the camera takes three shots with diff erent dynamic ranges (

P 79): 

100% for the fi rst, 200% for the second, and 400% for the third.  While dynamic range bracketing is in eff ect, 
sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in eff ect is restored when 
bracketing ends.

Select a bracketing amount.  Each time the shutter button is pressed, the camera takes three shots: one at 
the current white balanced setting, one with fi ne-tuning increased by the selected amount, and another 
with fi ne-tuning decreased by the selected amount.

 Take photographs.