Fujifilm FinePix S1000fd Manual Do Proprietário

82

[SHOOTING MENU]

You can change the white balance for a photographed image 
by using colored paper instead of white paper.

• In AUTO mode, the correct white balance may not be 

achieved for subjects such as close-ups of people’s 
faces and pictures taken under a special light source. 
Select the correct white balance for the light source.

• When the flash fires, the white balance (except for 

custom white balance) setting for the flash is used. 
Consequently, to achieve a particular effect, the flash 
mode should be set to Suppressed flash (

➝p.65).

• The specified custom white balance is retained until it is 

reset. This setting is retained even if the batteries are 
removed.

• The color tones may vary depending on the shooting 

conditions (light source, etc.).

• After taking the picture, check the image color (white 

balance).

• Explanation of Terms “White Balance” (

➝p.157).

Use this mode to reduce the time required for focusing 
when pressing the shutter button down halfway.
It is useful to avoid missing snapshot opportunities.

[

 EVF/LCD MODE] in the [U SET-UP] menu is 

automatically set to 60fps (

➝p.156).

• When taking pictures while the [HIGH-SPEED 

SHOOTING] mode is set to [ON], the batteries will run 
down more quickly.

• When setting . Sport mode, the camera sets to 

[HIGH-SPEED SHOOTING] mode automatically.

Set the exposure 
compensation again, using 
a negative value (–) when 
[OVER] appears and a 
positive value (+) when 
[UNDER] appears (

➝p.61).

Setting the menu (

➝p.74)