Fujifilm FinePix J50 Manual Do Proprietário

108

Warning Displays

• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.

• Camera fault.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your 

camera.

• Wipe the contact area on the Memory Card with a 

soft, dry cloth. It may be necessary to format the 

Memory Card (

➝p.84). If the message still 

appears, replace the Memory Card.

• Contact your FUJIFILM dealer.

• Insert a compatible Memory Card that is operation-

checked at FUJIFILM Corporation (

➝p.16).

[\ MEMORY FULL]

[Y MEMORY FULL]

The internal memory or Memory Card is full.

Erase some images in internal memory or Memory 
Card (

➝p.36), or use a Memory Card that has ample 

free space.

• The data could not be recorded due to a Memory 

Card error or a connection error between the 
Memory Card and camera.

• The image cannot be recorded as it is too large to 

fit in the available space on the Memory Card.

• The Memory Card or internal memory is not 

formatted.

• Re-insert the Memory Card or turn the camera off 

and then on again. If the message still appears, 
contact your FUJIFILM dealer.

• Use a new Memory Card.

• Format the Memory Card or internal memory on 

the camera (

➝p.84).

The SD Memory Card switch is slide to the “Lock” 
side. 

Unlock the protection by sliding it back (

➝p.17).

The data could not be recorded or copied since the 
internal memory is full.

Erase some images from the internal memory 
(

➝p.36), or use a Memory Card that has ample free 

space.

The timing for recording was incorrect because the 
Memory Card was formatted on a PC.

Use a Memory Card that was formatted on the 
camera.

The frame number has reached 999-9999.

A Insert a formatted Memory Card into the camera.
B Set [RENEW] as the [FRAME NO.] setting in the 

[

 SET-UP] menu (

➝p.81).

C Start taking pictures (The frame number starts 

from “100-0001”).

D Set [CONT.] as the [FRAME NO.] setting in the 

[

 SET-UP] menu.