Fujifilm FinePix Z3 Manual Do Proprietário

18

Charging the Battery

When connection is completed, battery charging begins.
Charging ends after about 2 hours.

[During charging] Lit red
[Charging completed] Off
[Charging error] Blinking red (

➝p.139)

When you try to charge the battery immediately after the 
camera has been used continuously for a long period, 
charging may not begin soon (the indicator lamp does not turn 
red).
This is not a camera fault, but is for protecting the battery from 
being charged while it is warm. Battery may degrade when 
charged at high temperatures.
Leave the camera connected to the cradle, and charging will 
automatically begin within 30 minutes.

• Turning the camera on during charging interrupts the 

charging.

• Charging times increase at low temperatures.

Turn the camera on and check the battery level indicator 
on the LCD monitor.

A There is ample battery charge. (Lit white)
B The battery is almost half charged. (Lit white)
C There is insufficient charge left in the battery. The 

battery will soon run out. Have a charged battery 
ready. (Lit red)

D The battery is depleted. The display will shortly go 

blank and the camera will stop working. Replace or 
recharge the battery. (Blinking red)

• Due to the nature of the battery, the battery level 

indicator (

, 

, or V) may appear early 

when the camera is used in cold locations. Try warming 
the battery in your pocket or a similar location before 
use.

• Battery with no remaining charge (V blinking red) 

may cause camera faults. Always load a fully charged 
battery.

• Depending on the camera mode, the transition from 

 to V may occur more quickly.