Fujifilm FinePix Z200fd Manual Do Proprietário

136

Warning Displays

Prints were specified for 1000 or more frames in the 
DPOF frame settings.

The maximum number of frames for which prints can 
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints 
onto another Memory Card and then specify the 
DPOF settings.

[r CAN NOT SET DPOF]

An attempt was made to specify DPOF settings for 
an image that is not supported by DPOF.

DPOF printing cannot be used with this image 
format.

[r CAN NOT ROTATE]

An attempt was made to rotate a movie or an image 
shot using a camera other than FinePix Z200fd.

These images cannot be rotated by image formats.

[r CANNOT EXECUTE]

An attempt was made to transmit or save an image 
or movie recorded with another device, or an image 
that cannot be played back, with TRIMMING FOR 
BLOG.

Some image formats cannot be transmitted or saved 
with TRIMMING FOR BLOG.

An attempt was made to resave an image that was 
saved with [TRIMMING FOR BLOG].

Images saved with [TRIMMING FOR BLOG] cannot 
be resaved.

An attempt was made to take a picture in 
[

AUCTION MODE] while 

 appeared in the 

LCD monitor.

Charge the battery or replace with a charged battery.

An attempt was made to set flash or sound in Silent 
mode.

Flash or sound cannot be set in the Silent mode. 
Release the Silent mode to set flash or sound.

The camera is not connected to a PC or printer.

• Check that the USB cable is connected correctly.
• Check that your PC or printer is turned on.
• When using IR communication, make sure the 

camera and the other device are transmitting and 
receiving within the image transmission range.