Fujifilm X-E2S Manual Do Proprietário

Mode Selection

■  Program AE (P)
To allow the camera to adjust both shutter speed and ap-
erture for optimal exposure, set shutter speed and aper-
ture to A.  P will appear in the display.

 

Q If AUTO is displayed in red, press a function button (by default, 

Fn2/AUTO) to exit auto mode (

P 51).

 

Q If the subject is outside the metering range of the camera, 

the shutter speed and aperture displays will show “– – –”.

If desired, you can rotate the command dial to select other combinations of shut-
ter speed and aperture without altering exposure (program shift).  The new values 
for shutter speed and aperture are shown in yellow.  Program shift is not available 
if the attached fl ash supports TTL auto, or if an auto option is selected for 

U DY-

NAMIC RANGE in the shooting menu (

P 93).  To cancel program shift, turn the 

camera off .

 

R For information on the role of the command dial when the camera is used with 

lenses not equipped with an aperture ring, see “Lenses with No Aperture Rings” 
(

P 11).